Micro S-1 6MOA

Aimpoint

(No reviews yet) Write a Review
$1,429.00
SKU:
AP-200369
Availability:
Available Online & In-Store (call us to check floor stock)

Out of stock

Product Overview

The Aimpoint® Micro S-1 was designed specifically for use on shotguns. The innovative carbon fiber reinforced mounting system positions the optic on the lowest possible optical axis - without adding unnecessary weight. The Micro S-1 sight attaches directly to the shotgun at any point along the ventilated rib, and interchangeable adapter plates are included to accommodate most popular shotgun rib sizes.

The Micro S-1 greatly enhances hit percentage for hunters, as well as on the sporting clays course. It provides a compact, low-profile optic for shotgun hunters. The big, bright 6 MOA red dot provides an optimal combination of target acquisition speed and visibility.

  • Versatile optic for all shotgun applications
  • Available in 6 MOA dot size
  • Higher maximum light intensity settings for bright sky conditions
  • Low integrated and carbon fiber reinforced rib mount
  • Low optical axis
  • Interchangeable base plates to accommodate most rib sizes (6-12mm)
  • Lightweight, compact and fully enclosed protective housing
  • Possibility of full zeroing to customize the point of impact 
OPTICAL SPECIFICATIONS
 
Operating principle: Reflex collimator sight with LED
Optical magnification: 1x
Aiming dot size: 6 MOA
NVD compatible: No
Optical coating: Anti-Reflex
Clear aperture: 18 mm
Eye relief: Unlimited

ENVIRONMENTAL SPECIFICATIONS
 
Immersion, static: Submersible to 5 m (15 ft.)

POWER SOURCE
 
Battery type: 3V Lithium battery, type CR2032
Battery life - Day time use: 50 000h (over 5 years of continuous use)
Power intensity: 12 pos. 1 Off, 12 daylight of which 1 Extra Bright

PHYSICAL SPECIFICATIONS
 
Length sight only: 63 mm (2 15/32")
Width: 43 mm (1 11/16")
Height sight only: 41 mm (1 5/8")
Weight sight only (incl battery): Approximately 100 g (3.53 oz)
Housing material: High strength aluminum; integrated mount: Carbon fiber reinforced polymer
Surface treatment: Anodized, semi matte
Height of optical axis - sight and mount: 14 mm (9/16")
Adjustment: Range +1 m at 100 meters (+1 yds at 100 yds) in windage and elevation, 1 click = 13 mm at 100 meters = 10 mm at 80 meters = 7/16" at 100 yds

Reviews

(No reviews yet) Write a Review

All prices are subject to change (STC) due to fluctuation in the Australian Dollar as most items are imported. This also includes items which were ordered and were delivered at a higher cost than at the time of quotation. Refunds are available where quotation price cannot be maintained due to price increases (whether it be from supplier or as a direct result of cost increases of imported items).